Heze Weixin Forestry Chemical Technology Co

Muzhibao Concentrated Wood Mildew Remover
Product Introduction
Muzhibao Concentrated Wood Mildew Remover is a high-content wood mildew remover newly developed by Weixin Linhua. It has The mold is eliminated quickly, does not destroy the strength of the wood fiber, and does not change the original color of the wood
The color is non-toxic and has no irritating smell. It is safe and environmentally friendly. It is mainly aimed at the wood that is damp due to the high temperature and humidity in the rainy season or due to improper drying of the wood. Mold and mildew spots that appear on wooden craft products, packaging boxes, pallets, furniture boards, etc. caused by untimely high moisture content. The color of the treated wood can restore the original color of the wood. The treated area can ensure that mold will never appear again. With a series of advantages such as secondary growth, Muzhibao concentrated wood mildew remover is the most effective concentrated wood mildew remover with the highest penetration depth, strongest use and convenience on the market
Two main ingredients
The main ingredients of Muzhibao concentrated wood mildew remover are mold decomposition oxidants, mold removal reducing agents, surfactants, compound antibacterial agents, etc. It does not contain formaldehyde, heavy metals and other toxic and harmful substances, and complies with the new European standards for export
Three scopes of application
Muzhibao concentrated wood mildew remover is mainly suitable for Trichoderma, Penicillium and Aspergillus Niger due to plywood glue caused by moisture in wood caused by high temperature and humidity during the rainy season or high moisture content caused by improper storage of wood and delayed drying. The addition of flour to the high protein content leads to the removal of mold hyphae such as Aspergillus, white rot, Mucor, etc. It is widely used in wooden materials such as boards, furniture, wooden handicrafts, packaging boxes, pallets and other finished and semi-finished products
Four Implementation Standards National Standards
Five usage methods
Before operation, first clean the attachments on the wood surface. You can use brushing, spraying, soaking, vacuum and pressurization. When using the brushing method, use a brush or sponge to evenly apply Muzhibao concentrated wood mildew remover (according to the mildew condition, you can add water to dilute it appropriately. The dilution ratio is one part mildew remover to one part water. When operating, the wood surface must be completely wet. Standard) Cover the entire body with plastic sheeting (preservation film) and place it in a well-ventilated place to cool and dry in the sun for a few hours. After the wood mildew is eliminated, post-processing can be performed
In case of serious wood mold, the mold cycle is long and the surface is moldy or rotten. Treat twice when the wood mold mycelium has completely penetrated into the wood fiber conduits. When using the brushing method, use a brush or sponge to evenly apply the Muzhibao Concentrated Wood Mildew Remover stock solution for several times (the interval between each application is an hour. When operating, the wood surface is completely wetted as a standard) and cover the entire surface with a plastic cloth ( Cover with plastic wrap) and place in a well-ventilated place to cool and dry for a few hours. After the mildew on the wood is eliminated, post-processing can be carried out
When using the soaking method to deal with slight mildew, mildew spots, and mildew spots that have just appeared on the surface of the wood, the soaking method should be used according to the In case of mildew, you can moderately dilute it with water. The dilution ratio is one part mildew remover to one part tap water. The soaking time is about ~ minutes, and the mildew spots on the wood will disappear and the original color of the wood will be restored.
In case of severe wood mold, the mildew cycle is long on the surface. When rot or wood mold mycelium has completely penetrated into the wood fiber conduit, the soaking method can be appropriately diluted with water according to the mildew situation. The dilution ratio is one part mildew remover and one part tap water. Soak the wood mold. The soaking time is ~ minutes. The spots will disappear and the original color of the wood will be restored
Six precautions
Since this product is a polymer treatment agent, please avoid mixing it with reducing acids, alkalis, organic solvents and other substances
If treatment is required, it has already been For lacquer products, please be sure to clean the paint film on the wood surface before using this product
This agent can be recycled. When operating by soaking method, please ensure that the agent completely covers the wood and ensures the fluidity of the agent to facilitate complete penetration of the agent. It is recommended that the number of times the liquid treatment product is blended into the wood should not exceed the number of times. If you continue to use it, it is recommended to add no less than the total amount of the original drug to reactivate it to ensure that the drug continues to exert its effect
Less than this product There will be crystallization. Please store it in the above place in a cool place to avoid direct sunlight or high temperature to ensure product efficacy and stability
The effective use period is one month at room temperature